 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SK2788 Silicon N Channel MOS FET High Speed Power Switching ADE-208-538 1st. Edition Features * Low on-resistance R DS(on) = 0.12 typ (VGS = 10 V, I D = 1 A) * Low drive current * High speed switching * 4V gate drive devices. Outline UPAK 3 D 2 1 4 G 1. Gate 2. Drain 3. Source 4. Drain S 2SK2788 Absolute Maximum Ratings (Ta = 25C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Symbol VDSS VGSS ID I D(pulse)* 2 1 Ratings 60 20 2 4 2 1 150 -55 to +150 Unit V V A A A W C C Body to drain diode reverse drain current I DR Channel dissipation Channel temperature Storage temperature Pch* Tch Tstg Notes: 1. PW 10s, duty cycle 1 % 2. When using the alumina ceramic board (12.5 x 20 x 0.7 mm) 2 2SK2788 Electrical Characteristics (Ta = 25C) Item Drain to source breakdown voltage Gate to source breakdown voltage Zero gate voltege drain current Gate to source leak current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Body to drain diode forward voltage Body to drain diode reverse recovery time Notes: 1. Pulse test 2. Marking is "VY" Symbol V(BR)DSS V(BR)GSS I DSS I GSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss t d(on) tr t d(off) tf VDF t rr Min 60 20 -- -- 1.0 -- -- 1.6 -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- 0.12 0.16 2.8 180 90 30 9 15 40 35 0.9 35 Max -- -- 10 10 2.0 0.16 0.25 -- -- -- -- -- -- -- -- -- -- Unit V V A A V S pF pF pF ns ns ns ns V ns I D = 2A, VGS = 0 I F = 2A, VGS = 0 diF/ dt = 50A/s Test Conditions I D = 10mA, VGS = 0 I G = 100A, VDS = 0 VDS = 60 V, VGS = 0 VGS = 16V, VDS = 0 I D = 1mA, VDS = 10V I D = 1 A, VGS = 10V*1 I D = 1A, VGS = 4V*1 I D = 1A, VDS = 10V*1 VDS = 10V VGS = 0 f = 1MHz VGS = 10V, ID = 1A RL = 30 3 2SK2788 Main Characteristics Power vs. Temperature Derating 2.0 Pch (W) I D (A) Test condition : When using the alumina ceramic board (12.5 x 20 x 0.7 mm) 10 100 s 3 1 C D Maximum Safe Operation Area 1.5 PW = 1 10 m s m s n tio ra pe O Channel Dissipation Drain Current (1 1.0 0.3 Operation in this area is 0.1 limited by R DS(on) 0.03 sh ot ) (T c = 25 ) C 0.5 0 50 100 150 200 Ambient Temperature Ta (C) 0.01 Ta = 25 C 3 30 0.1 0.3 1 10 100 Drain to Source Voltage V DS (V) Typical Output Characteristics Typical Transfer Characteristics 5 10 V 4 6V 5V 4V 3.5 V 3 Pulse Test 5 I D (A) 4 3V 3 Tc = 75C Drain Current 2 2.5 V 1 VGS = 2 V 0 2 4 6 Drain to Source Voltage 8 10 V DS (V) 2 -25C 25C V DS = 10 V Pulse Test 1 0 2 4 6 Gate to Source Voltage 8 10 V GS (V) 4 2SK2788 Drain to Source Saturation Voltage vs. Gate to Source Voltage Drain to Source Saturation Voltage V DS(on) (V) Pulse Test Drain to Source on State Resistance R DS(on) ( ) 2.0 Static Drain to Source on State Resistance vs. Drain Current 5 Pulse Test 2 1 0.5 VGS = 4 V 10 V 0.3 3 1 Drain Current 30 10 I D (A) 100 1.6 1.2 0.8 0.2 0.1 0.4 2A 1A 6 2 4 Gate to Source Voltage 8 V GS (V) 10 0 0.05 0.1 Static Drain to Source on State Resistance R DS(on) ( ) Forward Transfer Admittance |y fs | (S) Static Drain to Source on State Resistance vs. Temperature 0.5 Pulse Test 0.4 2A 0.3 V GS = 4 V 0.2 1, 2 A 10 V 0 -40 0 40 80 120 160 Case Temperature Tc (C) 1A Forward Transfer Admittance vs. Drain Current 10 Tc = -25 C 5 2 1 0.5 75 C 25 C 0.1 0.2 0.1 0.1 V DS = 10 V Pulse Test 0.2 0.5 1 2 5 Drain Current I D (A) 10 5 2SK2788 Body to Drain Diode Reverse Recovery Time 500 Reverse Recovery Time trr (ns) 200 100 50 20 10 5 0.1 di / dt = 50 A / s V GS = 0, Ta = 25 C 0.2 0.5 1 2 5 10 Reverse Drain Current I DR (A) Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz 1000 500 Capacitance C (pF) 200 100 50 Ciss Coss 20 Crss 10 0 10 20 30 40 50 Drain to Source Voltage V DS (V) Dynamic Input Characteristics V DS (V) V GS (V) 100 ID=2A V DD = 10 V 25 V 50 V 20 100 50 Switching Time t (ns) 20 10 5 Switching Characteristics t d(off) tf tr t d(on) 80 16 Drain to Source Voltage 60 V DS 40 V GS 12 8 20 V DD = 50 V 25 V 10 V 2 4 6 8 Gate Charge Qg (nc) 4 0 10 Gate to Source Voltage 2 1 0.1 0.2 V GS = 10 V, VDD = 30 V PW = 5 s, duty < 1 % 0.5 1 Drain Current 2 5 I D (A) 10 0 6 2SK2788 Reverse Drain Current vs. Source to Drain Voltage 10 Reverse Drain Current I DR (A) 8 6 10 V 4 5V V GS = 0, -5 V Pulse Test 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage V SD (V) 2 Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 10 V 50 V DD = 30 V Vout 10% Vout Monitor Waveform 90% 10% 90% 90% td(off) 10% td(on) tr tf 7 2SK2788 Package Dimensions Unit: mm 4.5 0.1 0.4 1.8 max 1.5 0.1 0.44 max 1.0 1.5 1.5 3.0 0.8 min 0.53 max 0.48 max 1 2 3 2.5 0.1 4.25 max 4 0.44 max Hitachi Code EIAJ JEDEC UPAK SC-62 - 8 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. |
Price & Availability of 2SK2788
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |